Weapons

There isn't a more classic shape in our catalog than the Blackfencer Longsword. It's our second best-selling sword (after the Standard Federschwert), and for good reason. The swelled grip, pinned-through guard, and Blackfencer's specially selected nylon make this the best synthetic longsword you can buy!

2 lbs, 15.2 oz

2 1/2 inches point of balance

37 1/2 inches blade length

2 inches to 1 inch blade width (cross to tip)

10 inches grip-able handle

10 inches cross width

49 inches overall length

5/8 inches to 3/8 inches blade thickness

Our #1 selling sword! This classic training shape and design of the Blackfencer Federschwert has been around for centuries. The synthetic blade has the same balance, flex, and weight as a thin steel blade. It is also highly durable, with almost no reported failures.

2 lbs, 13.6 oz

2.5 inches from cross point of balance

37 1/2 inches blade length

1 1/4 inches to 1 inch (cross to tip)

10 inches cross

10 inches grip-able handle

49 overall length

1/2 inch average blade thickness (tapering from thicker at the strong to thinner at the weak)

We need to get our measurements, but it moves and flexes well!

SPECS ON BLACKFENCER.COM

The Heavy Longsword bridges the gap between the longsword and the extra-long longsword. The difference is subtle, but may be just what you're looking for.

3 lbs, 0.7 oz

2 1/2 inches from center of cross point of balance

38 inches blade length

10 inches cross

10 inches grip-able hilt

2 1/4 inches to 1 inch blade width (cross to tip)

1/2 inch blade starts thicker near cross and tapers appropriately toward tip

49.5 overall length

If you're a big fencer who wants a big sword, this is the one for you. The Longsword XL is appropriately scaled in the handle and blade to provide superior balance and flow. This sword may also substitute as a montante for smaller fighters.

We used Cold Steel's training bowies and other hard rubber training knives for years, and after several rounds of begging, Lynn Thompson of Cold Steel made rondels for us.

The blade offers a high level of flex near the tip while remaining strong near the hand. Most HEMA rondel techniques work great.  A few techniques that require stiffness along the whole blade will not, but that's the trade-off for having the safety of the flex.

Some people find the decorative points on the hilt to be a little scratchy (the wooden prototype had rounded points but this got simplified in the computer model for the mold).  One minute with a file will soften these a lot though.

The Heavy Longsword bridges the gap between the longsword and the extra-long longsword. The difference is subtle, but may be just what you're looking for.

3 lbs, 0.7 oz

2 1/2 inches from center of cross point of balance

38 inches blade length

10 inches cross

10 inches grip-able hilt

2 1/4 inches to 1 inch blade width (cross to tip)

1/2 inch blade starts thicker near cross and tapers appropriately toward tip

49.5 overall length

Looking at longswords throughout history, it didn't take long for complex hilted designs to begin appearing. The addition of simple rings on the side of the sword offers significant protection for the hands of the user. If you're seeking an increased level of safety, this sword is for you. The rings are over-sized to accommodate any size of glove in a thumb-grip.

3 lbs, 1.4 oz

39.5 inches blade length

2.5 inches point of balance

11 3/4 inches grip-able hilt

5 1/2 overall ring width

1 3/4 inches to 1 inch blade width (cross to tip)

52 3/4 inches overall length

10 inches cross width

5 1/2 inches total ring width

Based on a Brown Bess Musket (a historical training tool), this synthetic musket and flexible bayonet is a unique offering created by South Coast Swords and Blackfencer. The musket has sufficient weight to mimic the handling of an original, without being abusive if an accidental butt strike lands. A piece of metal (not included) can also be strapped to the rifle portion to reach the appropriate historical weight. The bayonet offers exceptional flex, and is pre-drilled with a pin to hold it in place. The bayonet may also be removed for ease of storage.

4 lbs, 7.5 oz

17 inches bayonet

57 1/2 inches musket without bayonet

72 3/4 inch overall length

If you are looking to simulate the cutting edges and blade width of a "knightly" style dagger -- also called the "sword-hilted dagger" -- this is a great alternative to the rondel trainer.  Although both the point and the flex are slightly less friendly than the rondel, they are within range for similar knife and dagger trainers.  Padded clothing is recommended, and of course eye protection is a must.

Looking at longswords throughout history, it didn't take long for complex hilted designs to begin appearing. The addition of simple rings on the side of the sword offers significant protection for the hands of the user. If you're seeking an increased level of safety, this sword is for you. The rings are over-sized to accommodate any size of glove in a thumb-grip.

3 lbs, 2.3 oz

39 1/2 inches blade length

2 inches width to 1 inch width (cross to tip)

11 3/4 inches grip-able handle length

2 inches from cross point of balance

10 inches cross width

52 3/4 inches overall length

5 1/2 inches total ring width

Blackfencer's Sidesword is one of our best sellers. Fencers love the elegance of the design and the handling, as well as the protection offered by the knuckle bow and covered ricasso. Pair with a buckler for maximum Marozzo!

2 lbs, 4.4 oz

37 1/2 inches blade length

4 inches from cross point of balance

9 3/4 inches cross width

4 inches grip-able handle length

2 1/4 inches ricasso

43 1/4 inches overall length

1 1/2 inches to 3/4 inches blade width (cross to tip)

1/2 inch average blade thickness, tapers toward tip