Based on: Mid-16th century, items depicted in manuals of the period and surviving examples.
Overall length: 32"
Blade Length: 25.8"
Blade Width: 1.6"
Nagel Height: ~2.75"
Grip Length: 5.7"
Balance Point: 3.75"
Weight: 1.49 lbs (675g)
A steel Dussack trainer has been a frequent request from our customers for some time. The form of this sword is based on the dussack trainers portrayed in German fencing treatises including Meyer's 1570 "The Art of Combat",but its handling mimics that of a sharp sword. Although period trainers were usually wood covered in leather, or whale-bone, this product permits much better sensitivity in the bind than synthetic, leather, or other training tools currently on the market. This elegantly simple piece is not only a joy to hold in the hand but should give long and steady service in the practice of the Dussack, an iconic piece in the german fencing traditions of the late medieval period.
It has a sturdy hand forged nagel that is hot peened to the blade providing protection for the hand. The wooden scale grips are glued and set with steel pins. The knuckle bow is enlarged to provide clearance for the heavy gauntlets allowing manipulation of the sword with little hindrance from safety equipment. The blade is flexible enough that it is safe for bouting with standard safety equipment. We especially recommend this product as a training tool for developing a nuanced understanding of this complex weapon.
Here is an excellent article about the history of the Dussack on HROARR.
Blackfencer's Steel Longsword is the blunt steel trainer you are looking for. With the addition of large rings, yours hands will be safer than ever before! With sufficient flex for tournament fighting and edges that are thick enough to withstand moderate abuse (note that this is a blunt, NOT a heavy feder), this is a sword that will serve you well in training for years to come. South Coast Swords has several that have been used regularly for over a year, and students and instructors alike love their performance and handling. This longsword is sure to "steel" your heart away!
3 lbs, 12 oz ~
37 3/4 inches blade length
11 3/4 inches cross width
11 inches grip-able length
3 inches from cross point of balance
2 inches to 3/8 inches blade width taper (cross to tip)
50 inches overall length
Arms & Armor
Arms & Armor Meyer Training Rapier / Rappier
Based on Original: The pieces illustrated inA Thorough Description of the Art of Combatpublished in 1570 by Joachim Meyer.
Overall Length: ~36.75"
Blade Length: 31"
Blade Width: 1.15"
Quillon Width: 10"
Grip Length: 3.5"
Balance Point: 3.6"
Weight: 2.5 lbs
This training sword is based on the pieces illustrated in A Thorough Description of the Art of Combat published in 1570 by Joachim Meyer. He was a cutler as well as a teacher of the sword creating this major work on swordplay, which had several printings. He covers several different types of weapons in this work and it is often looked at as an important work dealing in the weapons of the 16th C.
This rapier is of a simple form with a straight barrel turned cross, a single side ring and knuckle bow. It has a bulbous pommel and matching terminators on the arms of the guard. It is gripped with out the finger passing over the guard as can be seen in the manual illustration below. The hilt furniture is steel. The grip is bound with strands of twisted wire. The blade is made of 6150 steel and has a rectangular cross section similar to our side sword trainer. This sturdy blade will last for many hours of practice and sparring.
Baltimore Knife & Sword
Baltimore Knife and Sword Federschwert
These come with a lifetime warranty against breakage provided by Baltimore Knife and Sword.
They are discounted as they got some rust on them, and are slow-er to sell at a higher price point. There is no known functional problem with these blades :)
Based on Original: Circa 1480-1510, Private Collection
• Overall Length: 44"
• Blade Length: 36.5"
• Blade Width: 1.75"
• Quillon Width: 8"
• Grip Length: 5"
• Balance Point: 6.38"
• Weight: 2.6 lbs
This broadsword exhibits a hexagonal cross-sectioned blade with a narrow fuller down the forte. The thickness of the blade dramatically tapers to the point to give an excellent balance for the cut; a detail often missed by many modern manufacturers. This style of sword was popular in the late 12th and early 13th centuries and again in the later part of the 15th century, when this sword was made. The furniture on this sword illustrates the writhen or twisted branch like forms favored by the craftsmen of central Europe. The grip is hardwood covered in leather with a stitched seam and shrunk to fit the elegantly shaped handle.
Arms & Armor
ANGLO-SAXON SWORD - OAKESHOTT TYPE X
Based on Original:dated circa 960 AD - 1035 AD, Anglo-Saxon. Find place: Thames at Wandsworth, Museum of London A2373.
• Overall length: 34.5"
• Blade length: 29.2"
• Blade width: 2.2"
• Balance point: 5.8"
• Weight: 2.1 lbs
This reproduction is based on an Anglo-Saxon sword from about the year 1000. This sword was found in riverbed of the Thames in two parts near Putney, south west of London. It is often referred to as the Wandsworth sword. The upper and lower guards are curved in shape and the pommel is of the three lobed variety made of two pieces. We have chosen to do the pommel in the same way with an upper half formed of three lobes and the lower half a curved shaped the mirrors the guard.
This sword is dated to a time of struggle in the history of England. The clash of the Kingdom of Wessex and the Danelaw was ongoing throughout the period. The raiding of the coast by the Danish starting at the end of the 10th Century added to the troubles. There was quite a bit of conflict and a good sword would have been in high demand.
The original has a blade inlaid with INGELRII on one face and two groups of three bars on the opposite. There are many swords with such inscriptions in the blade from this period. They where made in many locals and almost certainly had significant meaning to those who produced and owned these weapons.
The modern person often finds the hilts of these swords to be unique in handling. There is a great discussion here about how these swords where wielded. This Type X blade makes for a sword that feels quite light in the hand. It would be excellent for the style of combat of its day. Here are two interesting sources for what the combat of this type may well have looked like Hurstwic Sword and Shield Combat and Dimicator on Facebook.
Arms & Armor
IRISH SWORD - OAKESHOTT TYPE XVIII
Based on Original: Circa 1480-1520 Irish, Provenance Unknown
Overall Length: 37.4"
Blade Length: 31.5"
Blade Width: 1.75"
Quillon Width: 9.1"
Grip Length: 3"
Balance Point: 5.25"
Weight: 2.5 lbs / 1134 gr
This is a purely Irish design and one of only a few types of sword which can be attributed to a specific nationality. It's a unique design, highlighted by a spatulated crossguard and a pommel constructed as a ring with the tang passing through it. A rare sword for any collection.
The style of sword was carried by the Irish fighters in their homeland and as mercenary soldiers on the continent. They had aquired a fearsome reputation as stealthy fighters. Probably in no small part to their constant practice of cattle raiding back home.
The unquie pommel design is probably a development from the normal wheel pommel style. Some of these where made as a heavy ring with face plates. If the face plates are left off this structure you would have a ring for a pommel.
Arms & Armor
Fornovo Sword - Oakeshott Type XVIIID
Based on Original: Circa 1450-1500, Italian, private collection.
Overall length: 37.4"
Blade Length: 31.9"
Blade Width: 1.6"
Guard Width: 6.3"
Grip Length: 3.2"
Balance Point: 4.5"
Weight: 2.4 lbs
An elegant and deadly single-handed sword of the 15th Century, replicated from an original most likely made in southern Europe. This sword is capable of solid cuts and accurate thrusts from its Type XVIII blade. Seen in art of the period on the hip of soldiers and lords alike, this form of sword is similar to an example from the famous Dordogne river find of swords.
The stout wheel pommel and short straight guard frame a grip designed to be held so the hand has contact with the furniture. This allows the back of the hand to power movements of the blade, especially when using the back edge attacks. Use of the sword in one hand like this is described in the manuals of the period and excellent examples of how that is done can be found on the excellent blog and site atDimicator Medieval Swordplay.
We have titled this sword Fornovo after The Battle of Fornovo, in 1495, an engagement that well could have seen this sword in use by the invading French forces or their Venetian opponents and allies.