Products

Based on Original: dated circa 960 AD - 1035 AD, Anglo-Saxon. Find place: Thames at Wandsworth, Museum of London A2373.

• Overall length: 34.5"

• Blade length: 29.2"

• Blade width: 2.2"

• Balance point: 5.8"

• Weight: 2.1 lbs

This reproduction is based on an Anglo-Saxon sword from about the year 1000. This sword was found in riverbed of the Thames in two parts near Putney, south west of London. It is often referred to as the Wandsworth sword. The upper and lower guards are curved in shape and the pommel is of the three lobed variety made of two pieces. We have chosen to do the pommel in the same way with an upper half formed of three lobes and the lower half a curved shaped the mirrors the guard.

This sword is dated to a time of struggle in the history of England. The clash of the Kingdom of Wessex and the Danelaw was ongoing throughout the period. The raiding of the coast by the Danish starting at the end of the 10th Century added to the troubles. There was quite a bit of conflict and a good sword would have been in high demand.

The original has a blade inlaid with INGELRII on one face and two groups of three bars on the opposite. There are many swords with such inscriptions in the blade from this period. They where made in many locals and almost certainly had significant meaning to those who produced and owned these weapons.

The modern person often finds the hilts of these swords to be unique in handling. There is a great discussion here about how these swords where wielded. This Type X blade makes for a sword that feels quite light in the hand. It would be excellent for the style of combat of its day. Here are two interesting sources for what the combat of this type may well have looked like Hurstwic Sword and Shield Combat and Dimicator on Facebook.

Based on: Mid-16th century, items depicted in manuals of the period and surviving examples.

Overall length: 32"

Blade Length: 25.8"

Blade Width: 1.6"

Nagel Height: ~2.75"

Grip Length: 5.7"

Balance Point: 3.75"

Weight: 1.49 lbs (675g)

 A steel Dussack trainer has been a frequent request from our customers for some time.  The form of this sword is based on the dussack trainers portrayed in German fencing treatises including Meyer's 1570 "The Art of Combat", but its handling mimics that of a sharp sword.  Although period trainers were usually wood covered in leather, or whale-bone, this product permits much better sensitivity in the bind than synthetic, leather, or other training tools currently on the market.  This elegantly simple piece is not only a joy to hold in the hand but should give long and steady service in the practice of the Dussack, an iconic piece in the german fencing traditions of the late medieval period.

It has a sturdy hand forged nagel that is hot peened to the blade providing protection for the hand. The wooden scale grips are glued and set with steel pins. The knuckle bow is enlarged to provide clearance for the heavy gauntlets allowing manipulation of the sword with little hindrance from safety equipment.  The blade is flexible enough that it is safe for bouting with standard safety equipment.  We especially recommend this product as a training tool for developing a nuanced understanding of this complex weapon.  

 Here is an excellent article about the history of the Dussack on HROARR.

Based on Original: The pieces illustrated in A Thorough Description of the Art of Combat published in 1570 by Joachim Meyer.

Overall Length: ~36.75"

Blade Length: 31"

Blade Width: 1.15"

Quillon Width: 10"

Grip Length: 3.5"

Balance Point: 3.6"

Weight: 2.5 lbs

This training sword is based on the pieces illustrated in A Thorough Description of the Art of Combat published in 1570 by Joachim Meyer. He was a cutler as well as a teacher of the sword creating this major work on swordplay, which had several printings. He covers several different types of weapons in this work and it is often looked at as an important work dealing in the weapons of the 16th C. 

This rapier is of a simple form with a straight barrel turned cross, a single side ring and knuckle bow. It has a bulbous pommel and matching terminators on the arms of the guard. It is gripped with out the finger passing over the guard as can be seen in the manual illustration below. The hilt furniture is steel. The grip is bound with strands of twisted wire. The blade is made of 6150 steel and has a rectangular cross section similar to our side sword trainer. This sturdy blade will last for many hours of practice and sparring.

With a rawhide edge and linen faces, this buckler will provide you the protection and feedback that you crave. The boss fits a light glove, and the faceted nails give you that truly authentic feel. Pair it with a steel arming sword to complete the package.

3 lb, 2 oz

14 inches diameter

2 1/2 inches boss depth

5 inches boss width

Rawhide rim with linen covered wood core

Messer is fun. Messer with sharp sims is even more fun! The notches along the blade engage when paired with another sharp sim sword, and re-create the feeling of binding with sharp blades with a high level of accuracy. Many students at South Coast Swords pick these immediately when it's time for messer class.

1 lb, 13.5 oz

4 inch point of balance from center of cross

27 1/4 inch blade length

7 inch cross width

2 inch to 1 inch blade width taper

1/2 inch blade thickness

8 1/2 inch grip-able handle

36 3/4 inches overall length

In Blackfencer's Falkner-style messer, the straight false edge and clipped long edge tip come together in a fun and distinctive blade shape. The sword maintains the balance and feeling of standard messers, making the selection of this weapon one of personal preference. This messer is designed specifically for left-handed fighters.

1 lb 15.3 oz

4 inches from cross point of balance

7 1/4 inch cross width

8 1/4 inch grip-able handle

27 3/4 inch blade length

2 1/4 inches blade to 1/2 inches (cross to tip)

37 1/2 inch over all length

approx 1/2 inch thickness

1 1/2 inch ring (nagel) height